Shower room pulley heat dissipation control
The circulating oil lubrication is sufficient, the oil supply is Shower room pulley easy to control, and the ability of heat dissipation and impurity removal is strong. Circulating oil lubrication is applicable to the occasions for heat dissipation or impurity removal, as well as the occasions with high speed, high temperature and heavy load, with high reliability. Circulating oil lubrication is an ideal lubrication method. However, an independent oil supply system is required, and the manufacturing cost is relatively high.
oil mist lubrication
The lubricating oil is mixed with a small amount of lubricating oil by compressed air in the oil mist generator to form an oil mist, which is then transmitted to the bearing lubrication part.
The oil mist lubrication has small mixing loss and temperature rise, saves oil, and has few impurities in the oil. In addition, the air flow generated by the oil mist spray has a certain cooling effect, which can also effectively prevent the intrusion or discharge of impurities. However, the cost of the lubricating device is high, and there are certain requirements for the viscosity of the oil used. Generally, it should not be higher than 340 ㎜ 2/s, otherwise the atomization effect will not be achieved. In addition, if the seal is not tight during lubrication, some oil mist may escape into the air and pollute the environment. If necessary, an oil-gas separator should be used to collect the oil mist. Oil mist Shower room pulley lubrication is suitable for high-speed applications.