Assembly process of spindle and bearing
(1) Check the fit between the rolling bearing and the internal control of the sleeve (or box hole)
(2) Clean, trim, burr and chamfer all parts
(3) Measure the radial runout value of the inner and outer rings of the rolling bearing and mark the maximum point
(4) Grinding adjustment washer (spacer) thickness (high-speed grease shall be added during installation, which is 30% of the volume of bearing raceway cavity)
(5) After installation, check the radial runout of the main shaft to meet the requirements of the drawing
Circlip for hole, also known as inner circlip
Circlip for shaft, also known as external bearing circlip
